Hobart Battery Charger

Battery Point is an historic inner suburb of Hobart, Tasmania. It is located south of the city centre. It is home to several shops and restaurants. The area is a popular tourist attraction.

The 20mm lithium button batteries can be fatal if ingested by small children. These batteries are shiny and appear to be the same size as many sweets.

Battery-Mate AC500 24Volt Forklift Battery Charger

The battery charger is industrial rated and value designed, using a ferroresonant power conversion circuitry that maximizes forklift battery life. The microprocessor controlled, dip switch programmable charger has a display that provides battery status and an 8 value float charge timer, initial stage timer and equalizing charge timer.

Forklift battery cells stratify over time, with different concentrations of acid in the electrolyte. A good quality charger deals with this by properly sizing the charger. A charger that is too small risks undercharging the batteries and not stirring the chemistry sufficiently.

Battery-Mate AC300 24Volt Forklift Battery Charger

The Battery-Mate family of chargers is industrial rated, value-designed and extensively engineered to furnish an efficient, problem-free charge each time a battery is connected. They feature the inherently efficient ferroresonant power conversion circuitry, which is virtually maintenance-free, to maximize forklift battery life by precisely charging each battery based on its depth of discharge.

Battery World Hobart is a division of R&J Batteries and sells car, truck, marine, caravan, golf cart, deep cycle and motorcycle batteries as well as lubricants and accessories. Visit them today for a diverse product range, free battery testing and expert advice.

Battery-Mate AC300A 24Volt Forklift Battery Charger

This battery charger is industrial rated, value-designed and extensively engineered to furnish an efficient, problem-free charge each time a battery is connected. The inherently efficient Ferroresonant power conversion circuitry is maintenance-free and rated for years of service.

The charger is sized to.1C, or 10% of the battery’s amp hour capacity. This is a good rule of thumb for most lead acid batteries. Overcharging a battery decreases its life, and undercharging it doesn’t stir the electrolyte properly.

Most forklift battery manufacturers recommend 1500 cycles, or discharge/charge cycles every day for 6 to 8 hours. A properly sized charger will achieve this and more.

Battery-Mate AC200 24Volt Forklift Battery Charger

The Battery-Mate AC200 family of industrial rated, value-designed and extensively engineered battery chargers is the industry leader in flooded lead acid forklift battery charging. This patented design utilizes ferroresonant power conversion circuitry that is virtually maintenance-free.

Forklift batteries have taller cells than other types of lead acid batteries, which can cause the electrolyte to stratify over time. A good charger, particularly a quality microprocessor controlled charger like the PBM units we carry, deals with this with an equalizing cycle.

Many forklift battery manufacturers recommend 1500 cycles at a discharge of 80%, which works out to roughly 5 years of battery life with daily use.

Battery-Mate AC200A 24Volt Forklift Battery Charger

Most forklift batteries are designed to be cycled 1500 times, each cycle being a complete discharge and recharge. This works out to being charged 6-8 hours a day for 5 days a week, for 15 years. If you use a quality microprocessor controlled charger like these PBM units, you can expect more cycles than this.

These chargers are industrial rated, value-designed and extensively engineered to furnish an efficient, problem-free charge every time. They feature ferroresonant power conversion circuitry that is maintenance-free, providing a lifetime of trouble-free service. They are sized to precisely charge the battery based on its depth of discharge and include an equalizing charge.

Battery-Mate AC100 24Volt Forklift Battery Charger

Traditionally, forklift batteries are sized at.1C or 10% of battery amp hour capacity (some even have it printed on them). However, many forklifts don’t discharge their batteries down to 80%, and they see 15 years or more of life. The key is proper charger sizing and an equalizing charge cycle. A quality microprocessor controlled charger like the PBM units we sell, will properly stir the battery chemistry and give it an optimum charge each time it’s charged. These chargers are programmable with a dip switch 80% point, initial stage charge timer and more.

Battery-Mate AC100A 24Volt Forklift Battery Charger

The Battery-Mate AC100A 24Volt Forklift Battery Charger is industrial rated and value designed, with extensive engineered features. It is microprocessor controlled, dip switch programmable, and includes eight value final charge timers, initial stage timer, and an equalizing charge. It is also equipped with ferroresonant power conversion circuitry that maximizes forklift battery life, and a four digit LCD display that indicates real time delivery current, battery voltage on charge, and delivered battery charge (ah). The chargers are sized at.1C or 10% of battery amp hour capacity. The sizing reduces the risk of overcharging, and stirs the battery chemistry during a charge cycle.



from Solar Panels Hobart https://ift.tt/61AfMqK
via IFTTT

Comments

Popular posts from this blog

University of Hobart Solar Panels

LG Solar Panels Review

Why Solar Panels Are a Good Investment For the University of Hobart